glue bottles

I liked the new Titebond design initially. I did observe that the glue
would build up overtime. I then started to wash the top after each use. I
later decided to use smaller bottles, but still wash the top after each use.

Dave Paine.

<[email protected]> wrote in message
news:[email protected]...
>I just spent 10 minutes for the umpteenth time getting the dried glue
> out of the slightly-too-clever-for-it's-own-good cap of a bottle of
> titebond 2. it's pretty good when new, but after a few refills and
> cleanings it gets pretty mangled. the more mangled it gets the quicker
> it gets gunked up.
>
> yeah, I know, go buy another bottle of glue. I don't wanna. thing is,
> it's not all that great for a glue bottle. it's OK in use and it's
> nice that the lid doesn't get lost, but the service life is too short.
> it's _always_ the cap that fails in my shop.
>
> thinking about the resturant ketchup squeeze bottles. seems like the
> same kind of plastic, but built a little stouter and with a simpler
> spout. pretty cheap, too- half a buck or so from the resturant supply.
> anybody using these? something else? got a favorite?

Mustard, Plotchman's salad style. Tom

I just bought on of these bottles. So far I like it. I don't have to
turn the bottle over and wait for the glue to run out.
http://www.tools-plus.com/fasgb-glubot.html
Ted

<[email protected]> wrote in message
news:[email protected]...
>I just spent 10 minutes for the umpteenth time getting the dried glue
> out of the slightly-too-clever-for-it's-own-good cap of a bottle of
> titebond 2. it's pretty good when new, but after a few refills and
> cleanings it gets pretty mangled. the more mangled it gets the quicker
> it gets gunked up.

Snip

I posted these instructions for Swingman the other day when he was trying
to understand the instructions that came with his glue bottle. I could not
resist reposting them again for you. LOL

I am the owner of a tool. Importance is placed during the time of cleaning
with care. Glue liquids will harden and require effort for removal on the
wheel. When need for tool has expired clean completely with cleaning
materials.

;~)

Sat, Nov 5, 2005, 6:09pm (EST-2) [email protected]
I just spent 10 minutes for the umpteenth time getting the dried glue
out of the slightly-too-clever-for-it's-own-good cap of a bottle of
titebond 2. <snip> something else? got a favorite?

One of my Titebond II tops broke. Found out a French's mustard top
fits perfect, and works nicely.



JOAT
If it ain't broke, don't lend it.
- Red Green

On Mon, 07 Nov 2005 19:54:14 GMT, Phisherman <[email protected]> wrote:

>On Sat, 05 Nov 2005 18:09:32 -0700, [email protected] wrote:
>
>>I just spent 10 minutes for the umpteenth time getting the dried glue
>>out of the slightly-too-clever-for-it's-own-good cap of a bottle of
>>titebond 2. it's pretty good when new, but after a few refills and
>>cleanings it gets pretty mangled. the more mangled it gets the quicker
>>it gets gunked up.
>>
>>yeah, I know, go buy another bottle of glue. I don't wanna. thing is,
>>it's not all that great for a glue bottle. it's OK in use and it's
>>nice that the lid doesn't get lost, but the service life is too short.
>>it's _always_ the cap that fails in my shop.
>>
>>thinking about the resturant ketchup squeeze bottles. seems like the
>>same kind of plastic, but built a little stouter and with a simpler
>>spout. pretty cheap, too- half a buck or so from the resturant supply.
>>anybody using these? something else? got a favorite?
>
>
>You can always use a (free) recycled mustard bottle.

I go through mustard way slower than I go through glue bottles. in
fact, the last jar of mustard in my fridge got so old I threw it out.
haven't replaced it yet, either. that was sometime last year...

I don't think I've ever bought mustard in a squeeze bottle.

Mike O. <[email protected]> wrote in
news:[email protected]:

> I use the school sized elmers bottle and refill when needed. It's
> small enough to carry in my tool belt. The tip stays cleaned out
> pretty well and when it gets worn out I spend 49 cents on another.
>
> Mike O.
>

Sometimes you can take the cap from the Elmer's and put it on another
type of glue bottle...

Puckdropper
--
www.uncreativelabs.net

Old computers are getting to be a lost art. Here at Uncreative Labs, we
still enjoy using the old computers. Sometimes we want to see how far a
particular system can go, other times we use a stock system to remind
ourselves of what we once had.

To email me directly, send a message to puckdropper (at) fastmail.fm

I have been using one of these for a few months and I like it. I just had to
do a major cleaning because the glue went bad. It wasn't really easy.
max

> I just bought on of these bottles. So far I like it. I don't have to
> turn the bottle over and wait for the glue to run out.
> http://www.tools-plus.com/fasgb-glubot.html
> Ted
>

I like the newer Elmer's design - bottle is easy to grip, has a flat side so
it doesn't roll to China if it tips over, and it has a fine tip (adjustable
via where you cut it) with a snap on cap.

The Elmer's glue seems to hold up as well as Titebond. I got it free at a
WW show and will probably buy with it goes empty.


<[email protected]> wrote in message
news:[email protected]...
>I just spent 10 minutes for the umpteenth time getting the dried glue
> out of the slightly-too-clever-for-it's-own-good cap of a bottle of
> titebond 2. it's pretty good when new, but after a few refills and
> cleanings it gets pretty mangled. the more mangled it gets the quicker
> it gets gunked up.
>
> yeah, I know, go buy another bottle of glue. I don't wanna. thing is,
> it's not all that great for a glue bottle. it's OK in use and it's
> nice that the lid doesn't get lost, but the service life is too short.
> it's _always_ the cap that fails in my shop.
>
> thinking about the resturant ketchup squeeze bottles. seems like the
> same kind of plastic, but built a little stouter and with a simpler
> spout. pretty cheap, too- half a buck or so from the resturant supply.
> anybody using these? something else? got a favorite?

[email protected] wrote in news:[email protected]:

> I just spent 10 minutes for the umpteenth time getting the dried glue
> out of the slightly-too-clever-for-it's-own-good cap of a bottle of
> titebond 2. it's pretty good when new, but after a few refills and
> cleanings it gets pretty mangled. the more mangled it gets the quicker
> it gets gunked up.
>
> yeah, I know, go buy another bottle of glue. I don't wanna. thing is,
> it's not all that great for a glue bottle. it's OK in use and it's
> nice that the lid doesn't get lost, but the service life is too short.
> it's _always_ the cap that fails in my shop.
>
> thinking about the resturant ketchup squeeze bottles. seems like the
> same kind of plastic, but built a little stouter and with a simpler
> spout. pretty cheap, too- half a buck or so from the resturant supply.
> anybody using these? something else? got a favorite?

Glu-Bot bottles by Fastcap. I got mine from the lumberyard, but they have
them on Amazon and most of the online stores as well. They do cost about
six bucks, but they have a design that mostly eliminates the top plugging
with dried glue. Plus you can buy replacement tips.

J T wrote:
> Sat, Nov 5, 2005, 6:09pm (EST-2) [email protected]
> I just spent 10 minutes for the umpteenth time getting the dried glue
> out of the slightly-too-clever-for-it's-own-good cap of a bottle of
> titebond 2. <snip> something else? got a favorite?
>
> One of my Titebond II tops broke. Found out a French's mustard top
> fits perfect, and works nicely.
>
>
>
> JOAT
> If it ain't broke, don't lend it.
> - Red Green
>

I gotta ask... what's covering your mustard now?

-John in NH

On Sat, 05 Nov 2005 18:09:32 -0700, [email protected] wrote:

>I just spent 10 minutes for the umpteenth time getting the dried glue
>out of the slightly-too-clever-for-it's-own-good cap of a bottle of
>titebond 2. it's pretty good when new, but after a few refills and
>cleanings it gets pretty mangled. the more mangled it gets the quicker
>it gets gunked up.
>
>yeah, I know, go buy another bottle of glue. I don't wanna. thing is,
>it's not all that great for a glue bottle. it's OK in use and it's
>nice that the lid doesn't get lost, but the service life is too short.
>it's _always_ the cap that fails in my shop.
>
>thinking about the resturant ketchup squeeze bottles. seems like the
>same kind of plastic, but built a little stouter and with a simpler
>spout. pretty cheap, too- half a buck or so from the resturant supply.
>anybody using these? something else? got a favorite?


You can always use a (free) recycled mustard bottle.

> Glu-Bot bottles by Fastcap. I got mine from the lumberyard, but they have
> them on Amazon and most of the online stores as well. They do cost about
> six bucks, but they have a design that mostly eliminates the top plugging
> with dried glue. Plus you can buy replacement tips.


Those look nice, but I would think that they have a fatal flaw... a separate
cap. A titebond/elmers/mustard cap has an integral lid.... I'm so sure that
(for me) a separate cap would end up on/closed less often than an integral
cap.

It would be nice if could just buy titebond caps separately.

-Steve

On Sat, 05 Nov 2005 18:09:32 -0700, [email protected] wrote:

>thinking about the resturant ketchup squeeze bottles. seems like the
>same kind of plastic, but built a little stouter and with a simpler
>spout. pretty cheap, too- half a buck or so from the resturant supply.
>anybody using these? something else? got a favorite?

I use the school sized elmers bottle and refill when needed. It's
small enough to carry in my tool belt. The tip stays cleaned out
pretty well and when it gets worn out I spend 49 cents on another.

Mike O.

[email protected] wrote:
> I go through mustard way slower than I go through glue bottles.

The mustard I use comes in jars. <G>

Barry

On Tue, 08 Nov 2005 20:00:55 GMT, John Girouard <[email protected]>
wrote:

>J T wrote:
>> Sat, Nov 5, 2005, 6:09pm (EST-2) [email protected]
>> I just spent 10 minutes for the umpteenth time getting the dried glue
>> out of the slightly-too-clever-for-it's-own-good cap of a bottle of
>> titebond 2. <snip> something else? got a favorite?
>>
>> One of my Titebond II tops broke. Found out a French's mustard top
>> fits perfect, and works nicely.
>>
>>
>>
>> JOAT
>> If it ain't broke, don't lend it.
>> - Red Green
>>
>
>I gotta ask... what's covering your mustard now?
>
>-John in NH


a broken titebond2 cap, perhaps?

Stephen M wrote:
>> Glu-Bot bottles by Fastcap. >
>
> Those look nice, but I would think that they have a fatal flaw...

I agree about the cap. The Glu-Bot really does work well controlling
drips and applying the glue very evenly. The large cap has a place to
store the red cap onboard.

Barry

[email protected] wrote:
> I just spent 10 minutes for the umpteenth time getting the dried glue
> out of the slightly-too-clever-for-it's-own-good cap of a bottle of
> titebond 2. it's pretty good when new, but after a few refills and
> cleanings it gets pretty mangled. the more mangled it gets the quicker
> it gets gunked up.
>
> yeah, I know, go buy another bottle of glue. I don't wanna. thing is,
> it's not all that great for a glue bottle. it's OK in use and it's
> nice that the lid doesn't get lost, but the service life is too short.
> it's _always_ the cap that fails in my shop.
>
> thinking about the resturant ketchup squeeze bottles. seems like the
> same kind of plastic, but built a little stouter and with a simpler
> spout. pretty cheap, too- half a buck or so from the resturant supply.
> anybody using these? something else? got a favorite?

I just use the glue bottle (500ml) and then purchase another when that
is empty.
That being said, if I purchased my glue in bulk, I'd be using the
"Ketchup" sauce bottles.
Many cabinet shops that I worked for used them and I used them when I
had my own Business.
Easy to refill - Large Neck
Soft enough to squeeze
Have good tip (you can alter the size by where you cut it)
Cheap

You may have to try a couple of brands before coming across one that you
like.
The biggest fault with some of the cheapy's is that the lid may pop of.

Hope this helps a bit
regards
John

On Sat, 05 Nov 2005 18:09:32 -0700, [email protected] wrote:

>I just spent 10 minutes for the umpteenth time getting the dried glue
>out of the slightly-too-clever-for-it's-own-good cap of a bottle of
>titebond 2. it's pretty good when new, but after a few refills and
>cleanings it gets pretty mangled. the more mangled it gets the quicker
>it gets gunked up.
>
>yeah, I know, go buy another bottle of glue. I don't wanna. thing is,
>it's not all that great for a glue bottle. it's OK in use and it's
>nice that the lid doesn't get lost, but the service life is too short.
>it's _always_ the cap that fails in my shop.
>
>thinking about the resturant ketchup squeeze bottles. seems like the
>same kind of plastic, but built a little stouter and with a simpler
>spout. pretty cheap, too- half a buck or so from the resturant supply.
>anybody using these? something else? got a favorite?

Back in the "Elmers glue" day, we used to buy squeeze bottles at hobby shops
that (I think) were for model airplane fuel...
Held about a pint and had a long, "L" shaped neck that was handy for putting a
bead of glue down and not too hard to ungunk..


mac

Please remove splinters before emailing

On Sat, 05 Nov 2005 18:09:32 -0700, [email protected] wrote:

>I just spent 10 minutes for the umpteenth time getting the dried glue
>out of the slightly-too-clever-for-it's-own-good cap of a bottle of
>titebond 2.

My Titebond caps never seem to get mangled - the clear bit pulls off
without mangling and I can clean it easily. How brutal are you being to
the thing when you try to dismantle it?

It's probably my favourite design of glue bottle. Much better than the
various other sorts of "peg in hole" caps on the others.

On Sat, 05 Nov 2005 18:09:32 -0700, [email protected] wrote:

>I just spent 10 minutes for the umpteenth time getting the dried glue
>out of the slightly-too-clever-for-it's-own-good cap of a bottle of
>titebond 2. it's pretty good when new, but after a few refills and
>cleanings it gets pretty mangled. the more mangled it gets the quicker
>it gets gunked up.
>
>yeah, I know, go buy another bottle of glue. I don't wanna. thing is,
>it's not all that great for a glue bottle. it's OK in use and it's
>nice that the lid doesn't get lost, but the service life is too short.
>it's _always_ the cap that fails in my shop.
>
>thinking about the resturant ketchup squeeze bottles. seems like the
>same kind of plastic, but built a little stouter and with a simpler
>spout. pretty cheap, too- half a buck or so from the resturant supply.
>anybody using these? something else? got a favorite?

Elmer's Carpenter's Wood Glue. The spout is absolutely clog proof and I
switched to it after going through the same spout-unclogging nonsense that
you've described. The glue itself is identical to Titebond as far as I've been
able to tell, though if you're really stuck on Titebond you can just refill the
Elmer's bottle with it.
To reply by e-mail, use jcarlson631 at yahoo dot com
-- jc