JJ

Joe >

05/06/2011 11:35 PM

Stanley 129 set-up question - corrected link


First, yes, I've Googled it - for days.

1. I've never used a plane.
2. I've read a few books on planes and I know that they are sharp.
3. I have the combination of of my g-g-grandfather's plane and a small
job that would seem best handled with a plane.

I have a Stanley 129 that is not in new condition; but then it's
pushing a hundred years old and was in daily use in its time.
While the critical components look wonderful, the plane would not
fetch the prices I've seen listed for the model (that's aside from
sentimental value).

I cannot achieve shavings - only sawdust. I think I must not setting it
up correctly. There's an adjustment / positioning lever behind the
blade that I don't know exactly what to do with. There's a picture showing
it at:
http://www.handplane.com/165/stanley-no-129-liberty-bell-fore-plane .
The second picture on the right gives the best view.

When moved, it changes the blade angle. However, when the frog is
tightened, it moves, so I'm thinking you start with it one position, then
move it to the other limit to lock.

Can anyone tell me how to properly set the adjustable part or anything
else about setting up this plane?

Thanks.


This topic has 2 replies

Rr

RicodJour

in reply to Joe > on 05/06/2011 11:35 PM

05/06/2011 8:05 PM

On Jun 5, 9:46=A0pm, Steve <[email protected]> wrote:
> On 2011-06-05 19:35:59 -0400, Joe <Joe@Joe'sPlace.com <invalid>> said:
>
> > =A0 I cannot achieve shavings - only sawdust. =A0I think I must not set=
ting
> > it up correctly. =A0There's an adjustment / positioning lever behind th=
e
> > blade that I don't know exactly what to do with. =A0There's a picture
> > showing it at:
> >http://www.handplane.com/165/stanley-no-129-liberty-bell-fore-plane.
> > The second picture on the right gives the best view.
>
> This is a transistional plane -- the generation between the wooden
> plane and the "modern" metal sole plane.
>
> The key feature for this is the adjuster that allows the blade to be
> raised and lowered without the use of a hammer of some sort -- one
> source referes to this as a "Bailey" adjuster, but it's not the same
> mechanism as most of us identify as a Bailey: a brass knob on a
> threaded post (seehttp://tinyurl.com/3w6lrwl-- note the middle plane
> shows the later clamp system, but doesn't show the adjuster as shown atht=
tp://www.handplane.com/129/stanley-no-28-fore-plane/).
>
> Here's a better web resource from Patrick's Blood amd Gore:http://www.sup=
ertool.com/stanleybg/stan12.htm#num135
>
> I have two larger (and marginally later) versions of this plane with
> the knob adjuster. With a sharpened blade and a flattened sole, these
> do work well. Remember, if you flatten the sole, raise the blade but
> leave it under tension and remove as little material as possible.

Two threads one subject. I didn't see your reply before I posted.
Sorry I duplicated your input, but ya gotta love Patrick Leach's
Stanley site. He should get a medal or something.

R

Sk

Steve

in reply to Joe > on 05/06/2011 11:35 PM

05/06/2011 9:46 PM

On 2011-06-05 19:35:59 -0400, Joe <Joe@Joe'sPlace.com <invalid>> said:

> I cannot achieve shavings - only sawdust. I think I must not setting
> it up correctly. There's an adjustment / positioning lever behind the
> blade that I don't know exactly what to do with. There's a picture
> showing it at:
> http://www.handplane.com/165/stanley-no-129-liberty-bell-fore-plane .
> The second picture on the right gives the best view.

This is a transistional plane -- the generation between the wooden
plane and the "modern" metal sole plane.

The key feature for this is the adjuster that allows the blade to be
raised and lowered without the use of a hammer of some sort -- one
source referes to this as a "Bailey" adjuster, but it's not the same
mechanism as most of us identify as a Bailey: a brass knob on a
threaded post (see http://tinyurl.com/3w6lrwl -- note the middle plane
shows the later clamp system, but doesn't show the adjuster as shown at
http://www.handplane.com/129/stanley-no-28-fore-plane/).

Here's a better web resource from Patrick's Blood amd Gore:
http://www.supertool.com/stanleybg/stan12.htm#num135

I have two larger (and marginally later) versions of this plane with
the knob adjuster. With a sharpened blade and a flattened sole, these
do work well. Remember, if you flatten the sole, raise the blade but
leave it under tension and remove as little material as possible.


You’ve reached the end of replies