I don't know. Rockler has a few of those things that rate almost 500 lb. a
piece. Unless you think you will sit one ton of dead weight on it, you
should be doing fine.
--
Young Carpenter
"Violin playing and Woodworking are similar, it takes plenty of money,
plenty of practice, and you usually make way more noise than intended"
"Barry" <[email protected]> wrote in message
news:[email protected]...
> Rockler has these ...
>
>
http://www.rockler.com/ecom7/showdetl.cfm?&DID=6&offerings_ID=653&ObjectGroup_ID=91&CATID=28
>
> ... but they would look too small on an ottoman I just built. I'm looking
> for something that would go on a couch ... or, umm, an ottoman.
>
> -Barry
>
>
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
Barry wrote:
>
> Rockler has these ...
>
> http://www.rockler.com/ecom7/showdetl.cfm?&DID=6&offerings_ID=653&ObjectGroup_ID=91&CATID=28
>
> ... but they would look too small on an ottoman I just built. I'm looking
> for something that would go on a couch ... or, umm, an ottoman.
>
> -Barry
If you want heavy duty try
www.cal-fasteners.com/leveling-mounts.html
$100 minimum order.
I used some on my workbench. Adjustable from above with
an allen wrench. Real handy on legs of a heavy workbench.
(bottom of the page)
http://home.comcast.net/~charliebcz/MT/CBbench20.html
charlie b
Consider swivel nuts:
http://www.carrlane.com/Catalog/index.cfm/27825071F0B221118070C1C513E111D081B0006280B1713050245221E0107070F1A3C3B285350415A
or,
leveling feet:
http://www.carrlane.com/Catalog/index.cfm/27025071F0B221118070C1C512D020609090C0015482013180B041D1E173C3B2853524455
All from Carr-Lane, and probably Grainger too, since Grainger seems to
re-sell Carr-Lane.
There's no $110 minimum that I'm aware of.
RB
charlie b wrote:
> Barry wrote:
>
>>Rockler has these ...
>>
>>http://www.rockler.com/ecom7/showdetl.cfm?&DID=6&offerings_ID=653&ObjectGroup_ID=91&CATID=28
>>
>>... but they would look too small on an ottoman I just built. I'm looking
>>for something that would go on a couch ... or, umm, an ottoman.
>>
>>-Barry
>
>
>
> If you want heavy duty try
> www.cal-fasteners.com/leveling-mounts.html
> $100 minimum order.
>
> I used some on my workbench. Adjustable from above with
> an allen wrench. Real handy on legs of a heavy workbench.
> (bottom of the page)
> http://home.comcast.net/~charliebcz/MT/CBbench20.html
>
> charlie b
Here is a site with heavy duty equipment legs. They are probably
available at a good restaurant supply house in your area.
http://www.componenthardware.com/chsai.htm
--
Keep the whole world singing. . .
Dan G
(remove the 7)
Barry wrote:
> Rockler has these ...
>
>
http://www.rockler.com/ecom7/showdetl.cfm?&DID=6&offerings_ID=653&ObjectGroup_ID=91&CATID=28
>
> ... but they would look too small on an ottoman I just built. I'm
> looking
> for something that would go on a couch ... or, umm, an ottoman.
>
> -Barry
On Wed, 27 Aug 2003 20:48:32 -0400, "Barry"
<[email protected]> Crawled out of the shop and said. . .:
Barry:
DAGS for the words "furniture glide"
Traves.
Try here
http://www.superior-components.com/
If they ain't got it it probably doesn't exist.
Be aware of the $50 min order.
R.C.
On Wed, 27 Aug 2003 20:48:32 -0400, "Barry"
<[email protected]> wrote:
>Rockler has these ...
>
>http://www.rockler.com/ecom7/showdetl.cfm?&DID=6&offerings_ID=653&ObjectGroup_ID=91&CATID=28
>
>... but they would look too small on an ottoman I just built. I'm looking
>for something that would go on a couch ... or, umm, an ottoman.
>
>-Barry
>