I've been putting wheels on everything.
I was bored, messing around with some scraps and threw this together for
fun.
http://www.mikedrums.com/benchwheels.mpg
or
http://www.mikedrums.com/benchwheels.mov
Warning if you're still on dialup... it's 12mb.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
On Jan 5, 4:14=A0pm, -MIKE- <[email protected]> wrote:
> I've been putting wheels on everything.
> I was bored, messing around with some scraps and threw this together for
> fun.
>
> http://www.mikedrums.com/benchwheels.mpg
> orhttp://www.mikedrums.com/benchwheels.mov
>
> Warning if you're still on dialup... it's 12mb.
>
> --
>
> =A0 -MIKE-
>
> =A0 "Playing is not something I do at night, it's my function in life"
> =A0 =A0 =A0--Elvin Jones =A0(1927-2004)
> =A0 --
> =A0http://mikedrums.com
> =A0 [email protected]
> =A0 ---remove "DOT" ^^^^ to reply
Me likes. I like good ideas. (I have also been known to steal
them....*running awaaaaay!!!!*)
"Leon" <[email protected]> wrote in message
> I was entertaining the feasibility of having casters screw down through
the
> middle of each of 4 legs. That however would involve long chains to keep
> every thing synchronized or jacking each one down one by one like you have
For a workbench, can I assume you've seen Norm's solution to wheels on a
bench? All he does is lift one end a few inches, kick out the wheel supports
and they drop in place to make his bench mobile.
"Upscale" <[email protected]> wrote in message
news:[email protected]...
>
> "Leon" <[email protected]> wrote in message
>> I was entertaining the feasibility of having casters screw down through
> the
>> middle of each of 4 legs. That however would involve long chains to keep
>> every thing synchronized or jacking each one down one by one like you
>> have
>
> For a workbench, can I assume you've seen Norm's solution to wheels on a
> bench? All he does is lift one end a few inches, kick out the wheel
> supports
> and they drop in place to make his bench mobile.
>
>
Yes I have seen Norm's however this bench may be several hundred pounds, I
plan on having lots of storage drawers incorporated. I don't think lifting
will be an option.
"-MIKE-" <[email protected]> wrote in message
news:[email protected]...
> I've been putting wheels on everything.
> I was bored, messing around with some scraps and threw this together for
> fun.
>
> http://www.mikedrums.com/benchwheels.mpg
> or
> http://www.mikedrums.com/benchwheels.mov
>
> Warning if you're still on dialup... it's 12mb.
>
Cool Mike!
I have been looking for a way to make a heavy work bench mobile and not. I
am wondering if you could simply push down the lever with your foot to
interlock with a spring loaded catch.
"-MIKE-" <[email protected]> wrote in message
news:[email protected]...
> I've been putting wheels on everything.
> I was bored, messing around with some scraps and threw this together for
> fun.
>
> http://www.mikedrums.com/benchwheels.mpg
> or
> http://www.mikedrums.com/benchwheels.mov
>
> Warning if you're still on dialup... it's 12mb.
>
>
>
> --
>
> -MIKE-
>
> "Playing is not something I do at night, it's my function in life"
> --Elvin Jones (1927-2004)
> --
> http://mikedrums.com
> [email protected]
> ---remove "DOT" ^^^^ to reply
I did the sort of the opposite on the base for my table saw. I welded two
3/4" nuts on the frame, and ran 3/4" threaded rod through them. I just crank
them down until some weight is carried by the rods.
Greg
"-MIKE-" <[email protected]> wrote in message
news:[email protected]...
>>> http://www.mikedrums.com/benchwheels.mpg
>>> or
>>> http://www.mikedrums.com/benchwheels.mov
>>>
>>> Warning if you're still on dialup... it's 12mb.
>>>
>>
>> Cool Mike!
>>
>> I have been looking for a way to make a heavy work bench mobile and not.
>> I am wondering if you could simply push down the lever with your foot to
>> interlock with a spring loaded catch.
>
> Yes, like this guy:
> http://woodgears.ca/mobile_base/jointer.html
>
> But I has that screw clamp from a crappy miter saw to recycle and couldn't
> resist. :-)
I was entertaining the feasibility of having casters screw down through the
middle of each of 4 legs. That however would involve long chains to keep
every thing synchronized or jacking each one down one by one like you have
done.
Thanks for the link.
>> http://www.mikedrums.com/benchwheels.mpg
>> or
>> http://www.mikedrums.com/benchwheels.mov
>>
>> Warning if you're still on dialup... it's 12mb.
>>
>
> Cool Mike!
>
> I have been looking for a way to make a heavy work bench mobile and not. I
> am wondering if you could simply push down the lever with your foot to
> interlock with a spring loaded catch.
>
Yes, like this guy:
http://woodgears.ca/mobile_base/jointer.html
But I has that screw clamp from a crappy miter saw to recycle and
couldn't resist. :-)
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
Robatoy wrote:
>
> Me likes. I like good ideas. (I have also been known to steal
> them....*running awaaaaay!!!!*)
We're all thieves. I stole the basis of this from that other link I
posted. And if you trace it back far enough, that guy inevitably
stole it from the ancient Egyptians. :-)
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
>> Yes, like this guy:
>> http://woodgears.ca/mobile_base/jointer.html
>
> Like yours, actually, but without the screw. Just step down on the
> center, and shove a stick in there to lock them down. The couple of feet
> of leverage looks sufficient to raise a much higher load.
>
I looked to his for inspiration.
His are very neat, clean, and perfect.
I'm not inspired to make the stuff used to move my stuff, used to make
nice stuff, nicer than the stuff I make. :-)
This is like version 8 of all the ones I've done.
I made a wood version of a metal cam wheel I saw at Woodcraft.
I'll post something.....
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
> This is like version 8 of all the ones I've done.
> I made a wood version of a metal cam wheel I saw at Woodcraft.
> I'll post something.....
>
http://www.mikedrums.com/castercam.mov
or
http://www.mikedrums.com/castercam.mpg
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
-MIKE- wrote:
>> This is like version 8 of all the ones I've done.
>> I made a wood version of a metal cam wheel I saw at Woodcraft.
>> I'll post something.....
>>
>
> http://www.mikedrums.com/castercam.mov
> or
> http://www.mikedrums.com/castercam.mpg
This is outstanding. One Christmas the wife gave me a Delta Mobile base
(http://www.onlinetoolreviews.com/articles/mobilebaseshowdown.htm)
and all I used was the cam wheel. I have my table saw and jointer (old
heavy iron) on one bench and I attached 2 large heavy duty no swivel
casters to one end and the Delta cam swivel wheel to the other. The
bench always rests on the two non swivel wheels but since they only move
in one direction, the bench is super stable when cutting. I've thought
of making a duplicate out of metal of the cam swivel (My brother welds,
not me) but never got around to it. I think I'll work on one like you
made out of wood... Do you have any nice drawings (sketchup wold be
great) or detailed pictures?
--
Jack
Using FREE News Server: http://Motzarella.org
http://jbstein.com
>> or
>> http://www.mikedrums.com/castercam.mpg
>
> This is outstanding. One Christmas the wife gave me a Delta Mobile base
> (http://www.onlinetoolreviews.com/articles/mobilebaseshowdown.htm)
> and all I used was the cam wheel. I have my table saw and jointer (old
> heavy iron) on one bench and I attached 2 large heavy duty no swivel
> casters to one end and the Delta cam swivel wheel to the other.
Yeah, that's all you really need is the one. I would love to make them
out of metal.... excuse to buy a welder.
And Jack, that Delta is one of the ones I copied.
> I think I'll work on one like you
> made out of wood... Do you have any nice drawings (sketchup wold be
> great) or detailed pictures?
>
I use Canvas for my plans, so I haven't gotten into sketchup.
But all I did for this was look at the pictures on the web...
http://images.rockler.com/rockler/images/92051-04-500.jpg
http://www.woodcraft.com/images/products/145488.jpg
The rockler one, mostly, plus they have an exploded view in the manual
available here...
http://images.rockler.com/tech/RTD10000503AA.pdf
I'm sure I could've gotten it smaller, but it works.
I'll take some closer pics of mine and post them.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
Took some pics...
http://www.mikedrums.com/cam_wheel/camwheel.html
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
Weeeeeeeeee!
http://www.mikedrums.com/tablesawwheels.mov
http://www.mikedrums.com/routertablewheels.mov
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
"-MIKE-" <[email protected]> wrote in message
news:[email protected]...
>>> http://www.mikedrums.com/benchwheels.mpg
>>> or
>>> http://www.mikedrums.com/benchwheels.mov
>>>
>>> Warning if you're still on dialup... it's 12mb.
>>>
>>
>> Cool Mike!
>>
>> I have been looking for a way to make a heavy work bench mobile and not.
>> I am wondering if you could simply push down the lever with your foot to
>> interlock with a spring loaded catch.
>
> Yes, like this guy:
> http://woodgears.ca/mobile_base/jointer.html
Like yours, actually, but without the screw. Just step down on the center,
and shove a stick in there to lock them down. The couple of feet of leverage
looks sufficient to raise a much higher load.
>
> But I has that screw clamp from a crappy miter saw to recycle and couldn't
> resist. :-)
The mother of all evil is idle hands and a junk part box.